N Spectrum V2.2.1 正式版 已推出 請至本公司下載專區下載適合版本
N Spectrum V2.2 正式版 已推出 請至本公司下載專區下載適合版本
HD1-1648H 功成身退，即日起以 HD1-16 取代
本公司自即日起針對 FD20ITIR IP攝影機做全面硬體及機構升級
山宏即將參加 2014 SECUTECH
HD-SDI SONY+EYENIX 模組升級通知
山宏正式推出最新 IPVMS 管理軟體 Trium N Spectrum
本公司 HD1、MH、DX、SH、MX 即將全面硬體升級為 960H REAL TIME 機種
本公司 2013 台北國際安全展 展出成功
WIN4NET 2013 ROAD MAP
SAM MYUNG 公司更名公告
本公司最新代理 Visionmaru 品牌DVR
2013 安全自動化 IP&HD 年鑑 廣告
DLL MODE SWITCH
2.0M 1080P 網路攝影機 即將上市
Trium I 軟體介紹
Trium W 軟體介紹
2011年度 POS-Watch DVR 新機發表時程
2011年度 RIFATRON DVR 新機發表時程
本公司SECUTECH TAIPEI 2011與韓國RIFATRON共同展出成功
Smart Eyes 手機專用監看軟體開放下載
RIFATRON DVR 之 PTZ 攝影機支援對照表
[2014/05/26] N Spectrum V2.2 正式版 已推出 請至本公司下載專區下載適合版本
Simplified network configuration protocols: requires a single port configuration and forwarding, eliminating the need to port-forward the three pre-existing ports for all media servers as required in older versions. Enterprise Controller, Media Proxy and Media Server ports have been replaced by a one port connection (normally 7001). In addition, the Enterprise Controller is no longer required to connect to each Media Server. For the Client to access video, the Media Server simply connects to the Enterprise Controller, not bi-directionally as before.
PTZ Tours. Our PTZ feature has been expanded to include advanced camera tours and also allow our users to set a default “home” position that the camera can be set to return to after any use. The “home” position refers to the default position preset the camera returns to after a user definable period of time. It can either be a preset position position or it can return to a predefined tour schedule.
Light skin UI. A user is able to select between a light and a dark UI options (see System Settings).
New events and actions:
A continuous sound on "Motion on camera" and "Input signal on camera" events.
Disk is full - a notification will appear if a user selects storage with no available space.
New "Media server is started" diagnostic event.
Once Camera is discovered, the software attempts to configure the following settings on Camera: the best possible image quality for the main video stream (best possible resolution and FPS) and optimal quality for the secondary stream.
In some cases it may be necessary to set up custom stream settings on Cameras. For this purpose a new "Allow server to optimize cameras settings" checkbox is added to the installer and to system settings. Enabled by default, it can be disabled during initial system installation and/or within the client.
Simplified archive recovery (lost data due to migration or partial HDD failure):
Added a new recovery button to the "Server Settings" dialog.
Archive can be restored with no interruption to recording.
Improved compatibility mode: ability to download any previous Client versions. If Client and Server versions are different, the correct Client version will be downloaded automatically (Not available for MacOS client).
Auto detection of layout aspect ratio.
The default layout aspect ratio is 16:9.
If only one item is added, the aspect ratio of the new layout will equal to item’s aspect ratio.
If multiple items are added, the layout aspect ratio will be determined by the most common item aspect ratio.
Ability to fix aspect ratio for any video resource: added a new checkbox in "Camera Settings -> Expert" tab.
Generic HTTP plugin for simple streaming.
The export progress dialog is now modal. A user can perform other actions while exporting.
Added an ability to select any corner for placing a timestamp:
For screenshots. Click on "Screenshot" and "Save Screenshot as" will appear.
There is a new drop-down "Timestamps" list on the bottom of the dialog window with the following options: No timestamp, Top Left Corner, Top Right Corner, Bottom Left Corner and Bottom Right Corner.
Selected export area. The same drop-down list appears on the bottom of the "Export Video As" window. Note: The drop-down “Timestamps” list is disabled for .exe format.
Added a new checkbox to "Disable/Enable Auto Discovery" in “System Settings -> Server"
Ability to resize resource tree’s panel.
GPU-powered cient-side fisheye camera dewarping can now be applied universally to any symmetrical fisheye camera lens application.
An automatic and manual fisheye de-warp calibration system has been added in camera settings after a camera has been manually designated as fisheye creating a much better forensic dewarping fisheye video experience.
Dewarping is now available for still images.
Ability to run Client in configuration mode. This mode is activated automatically if Client is running on a weak PC (in terms of CPU and/or video adapter). Applies to DW Blade only. This mode is restricted (all animations and notifications are turned off and only one video can be viewed at a time).
Added more login ID/password combinations to improve camera auto-discovery.
A fisheye flag has been added. When the flag is on, PTZ control is automatically disabled.
Added a vendor name to "Camera Settings" and "Camera List".
Dewarping is improved. Added a new additional tab for adjusting the center and dewarping radius.
A new database has been created for backing up an installation due to a failed database migration.
Improved the dialog for manual camera addition. A list of cameras will appear automatically as located.
Added an external server guide to prevent cloning.
Improved license activation notification system.
Health monitoring improvements:
Added server uptime to health monitoring
Only 10 characters from a network connection name are displayed
The "No Signal" notification is replaced by "Server Offline"
Event and Actions -> Camera List.
All cameras that do not support I/O are highlighted in red
Added tooltips with error description
"Once per" wording has been changed to "No more than once per"
Added audio-support for select ACTi models: E-,D-, T-, K-, B-, I-series.
Increased maximum fps to 30 fps for HTTP and RTSP plugins.
Added a zoom combination "Alt+ Mouse Wheel" to enable/disable wheel zooming.
Incompatible auto-discovered EC(s) are automatically highlighted in the login dialog with EC’s version displayed.
The login dialog notifications are now more informative:
"You are trying to connect to an incompatible Enterprise Controller” will appear when trying to connect with a different customization.
"Wrong user or password" will appear when trying to connect with an incorrect login ID or password.
In all other instances, a general message will be displayed.
Improved license expiration warning notifications:
The "License Expiration" dialog is displayed for Administrator only.
The license expiration message is now displayed once a day in the following order: 15, 10, 5, 3, 2, 1 day(s) before the final expiration. The message will appear one last time after the final expiration.
Changed the default event accumulation time for rules from "Instant" to "30 second". Data is automatically grouped by category (represented as lines), making the notification panel much easier to use.
The last minute of archive appears striped on the timeline.
Introduced a new setting for video timeout to further optimize bandwidth efficiency:
Added a new checkbox - "Auto Pause Video" (see System Settings => General). If the checkbox is on, the video is paused automatically once a mouse is inactive to avoid the unnecessary bandwidth consumption. User selectable between 1 - 60 minutes
Android. Added audio for RTSP transport (only for AAC encoding).
“Client Only” Installer. Added a "Launch Client when set up exists" parameter to the last page.
A screenshot is always captured in high resolution regardless of the resolution quality the stream is displaying in when captured.
Added a new button to open the “Client Log” folder.
Added a new "Zoom to Selection" action to timeline’s context menu. The selection is automatically zoomed when clicked. If there is no selection on the timeline, "Zoom to Selection" is unavailable.
Ability to view client logs and clear cache.
Client graphics and animation have been optimized.
Thumbnails for panoramic cameras are disabled.
Tray Tool. An incorrect EC port appeared whenever changed. Fixed.
After a Media Server upgrade, the previous application version appeared in the "About" section. Fixed.
If dealing with over 3,000 resources, Enterprise Controller could not be restarted. Fixed.
"Say" has been renamed to "Speak" in Alarm/Event Rules.
"Change Camera Aspect Ratio" is removed from the camera context menu.
The Media Server log file limit has been increased by x5.
The Tray Tool menu did not disappear when clicking off the box. Fixed.
Whenever creating a user layout, the new layout will now appear under the user only and not under Admin (though fully accessible by Admin)
The "Connect to EC" dialog did not appear after making a language selection. Fixed.
Any previously opened item will re-open with the same aspect ratio.
Vivotek encoder. The first panel did not appear in the group after discovery. Fixed.
When stopping and deleting server from Resource Tree and re-starting again, the server version was not displayed in the “About” section. Fixed.
Zoom window. Video played upside down when moving a zoom window from a fish-eye camera to another item. Fixed.
Multi-view export. The quality identifier has been removed.
“+/-“ timeline zoom inactivity. Fixed.
Timeline did not disappear when toggling fullscreen using F11. Fixed.
Removed "Change Resolution" from the context menu for multi-view purposes.
Client did not respond to "Alt+Space". Fixed.
Screen recording did not work for the secondary screen. Fixed.
The automatic name for Digital Watchdog PTZ cameras included a prefix. Fixed.
Recording was not automatically stopped upon license expiration. Fixed.
Double-clicking on item’s rotate button did not start rotation. Fixed.
All active notifications now appear after setting the appropriate checkbox in notification settings (only for system messages)
When clicking on "Help" in "Layout Settings", "Browse" did not appear. Fixed.
The top panel no longer appears after the “window” mode.
"IP Address" in Media Server Settings is disabled. A user can no longer make any changes.
Selecting multiple hours in the calendar did not work properly. Fixed.
All known Axis encoder PTZ issues have been resolved.
Incorrect event notifications (wrong time specified). Fixed.
Removed “Panic Recording” from the front panel.
2018 MAGNA HONG CO., LTD. All Rights Reserved.
235 新北市中和區中正路738號10樓之4 TEL: +886-2-8226-1416 FAX: +886-2-8226-1149 Mail:
Designed By uGear 優吉兒